Confined-space drainage
Ideal for narrow wells and sumps of about 200 mm (8 inch).
SOUTH AFRICA
Compact, lightweight submersible pumps for clean and slightly muddy water. Made for narrow wells and sumps of about 200 mm, as well as basements, lift shafts, cable trenches and cellars.

Select a model to see its data. All GD models are single phase. We will confirm suitability against your required flow, head and site conditions.
Maximum head and maximum flow are separate limits; they are not reached at the same time. Use the performance curve in the catalogue to confirm your duty point.
| Model | Power | Voltages | Discharge | Best efficiency point | Max head | Max flow | Solids | Weight |
|---|---|---|---|---|---|---|---|---|
| GD-400 | 0.4 kW | 220 V | 50 mm / 2″ | 100 L/min at 8 m | 12 m | 230 L/min | 7 mm | 10.5 kg |
| GD-400F | 0.4 kW | 220 V | 50 mm / 2″ | 100 L/min at 8 m | 12 m | 230 L/min | 7 mm | 10.5 kg |
| GD-750 | 0.75 kW | 220 V | 50 mm / 2″ | 160 L/min at 11 m | 15.5 m | 325 L/min | 7 mm | 12.6 kg |
| GD-750F | 0.75 kW | 220 V | 50 mm / 2″ | 160 L/min at 11 m | 15.5 m | 325 L/min | 7 mm | 12.6 kg |
An all new design for general dewatering where space is tight, with double mechanical seals running in an oil housing.
Ideal for narrow wells and sumps of about 200 mm (8 inch).
Switch the discharge between vertical and horizontal to suit the installation.
Available as a manual version, or an automatic version with a built-in float switch that turns the pump on and off.
A urethane rubber impeller gives extra wear resistance.
The aluminium alloy motor frame and seal bracket help cool the motor as water flows past.
An auto-cut thermal switch cuts power on a power surge, locked rotor, phase failure or overload, then restarts the motor once it has cooled. Supplied with an 8 m cable.
See the manufacturer's catalogue for performance curves, dimensions and technical information.

50 Hz · PDF
Share your flow, head and site conditions and our team will help you find the right model.